Step Type:

Drag to rearrange

V-Core 3.1 Frame Assembly - Rear Right Corner

Right motor_plate assembly from Step 2

Install the right motor_plate assembly to the V-Core 3.1 frame as shown

Tighten the four M6x12 screws to secure the motor_plate assembly to the frame

Make sure the plate is fully seated against the 3030 extrusion before tightening the M6x12 screws

Insert two M5x40 Cap Head Screws into the motor_plate, as shown, in preparation for Step 14

Your contributions are licensed under the open source Creative Commons license.