Step Type:

Drag to rearrange

3030 Drop-in T-Nut - M6

xy_motor_cage_top_right_3.1_cutout Printed Part

M6x14 Countersink Screw

Loosely thread a 3030 T-Nut onto each of the M6x14 screws. Do not tighten them at this point.

M5 Nylon Locking Hex Nut

Install the xy_motor_cage_right_top assembly onto the frame as shown

Tighten the three marked M6x14 screws to secure the CoreXY motor cage top to the frame

Tighten the M5x40 screws, on the underside, to secure the bearing stacks into the CoreXY motor cage top

Your contributions are licensed under the open source Creative Commons license.