Step Type:

Drag to rearrange

4040 extruded corner assembly (For the spoilboard)

Position the 4040 extruded corner assembly in the middle of the extrusion gap as shown

The displayed measurement should be:

244mm for StrongHold PRO 1000x1000

369mm for StrongHold PRO 1000x1500 or 1500x1500

Ensure that the top of the extruded corner assembly is flush with the top of the 4080 extrusions

Fully tighten the M8 cap head screw to secure the extruded corner assembly to the frame

Repeat the above instructions for the remaining 3 extruded corner assemblies

Your contributions are licensed under the open source Creative Commons license.