Step Type:

Drag to rearrange

Check that the ball screw is fully inserted in to the FK12 mount before proceeding

There should be no gap between the end of the ball screw thread and the back of the FK12 mount

The screw threads on the end of the ball screw should be visible as shown

FF12 Ball Screw Mount

Install the FF12 ball screw mount on to the free end of the ball screw and into the opening on the idler plate

The ball screw is a precision fit into the bearing inside the FF12 mount. Do not force the ball screw into the bearing. When correctly aligned, it should slide in with little effort

Fully insert the FF12 ball screw mount into the opening in the idler plate

There should be no gap between the FF12 ball screw mount and the idler plate

Your contributions are licensed under the open source Creative Commons license.