Step Type:

Drag to rearrange

StrongHold PRO base assembly from Step 19

HG25 Linear Rail assembly from Step 23

Insert the linear rail in to the top slot of the 40120 extrusion, between the 3D printed spacers

Install the two HG25 40120 alignment tools as shown, this will make sure the linear rail is positioned correctly

Tighten every other M6x25 screw, starting from one end

Tighten the remaining M6x25 screws, starting from the same end as before

Remove the HG25 40120 alignment tools

Your contributions are licensed under the open source Creative Commons license.