V-Core 4 - Full machine build
View
Options
Preview new Authoring Experience
History
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Introduction
Details
Guide Steps
Review
Quiz
Ensure the belt teeth are facing the stepper motor pulleys.
Take one end of the top CoreXY belt, and feed it as shown:
Feed the belt through the left stepper motor bearing stacks.
Feed the belt behind the left xy_joiner, through the front tensioner and finally the front bearing stack on the xy_joiner.
Take the other end of the top CoreXY belt, and feed it as shown:
Feed the belt through the right stepper motor bearing stacks.
Feed the belt around the rear bearing stack on the xy_joiner.
Do not cut the excess belt at this stage.
« Previous
Next »
Your contributions are licensed under the open source Creative Commons license.
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.