V-Core 4 - Full machine build
View
Options
History
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Introduction
Details
Guide Steps
Review
Quiz
Insert the 2.5mm Cap Head Screws back in and tighten them.
DO NOT overtighten the screws, they are only 2.5mm and will break if excessive force is applied.
Tighten the set screw back in
DO NOT overtighten the screw, if excessive force is applied the heatbreak will be permanently damaged.
Put the socket back on
Try to insert the hotend on the toolhead and see if the cables align with the designated slot, if not, repeat Steps 23, 24 and 25 and try a different angle in Step 22
« Previous
Next »
Your contributions are licensed under the open source Creative Commons license.
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.