Editing Step 10 —
Prepare the following parts

Step Type:

Drag to rearrange

Rat Rig Mill - X Gantry Plate

2x mill_bellow_holder assembly

4x M5x16 Low Head Screw

4x M5 Nylon Locking Hex Nuts

2x Nut Block for TR8x8

Do not misplace the TR8x8 blocks with the TR8x4 blocks. If uncertain, test by threading them onto the TR8x8 lead screw

24x M3x6 Cap Head Screws

Your contributions are licensed under the open source Creative Commons license.