I needed to install the heat inserts into 2 of the arms and only one had all already installed.
I had to "open up" the holes on one of the arms so I could actually fit the heat insert's flanged part to line it up with the hole so it would melt through the hole correctly, and I needed to take a diamond file to the square hole to allow the POM arm insert to be seated.
Also, just like the others, I really wish you guys would've kept the arms Punkfil Gooey Green, it feels more true to the RatRig aesthetic in my opinion.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
@cruz or @ratrig do you have the Step 53 you can update this guide with?
mine were labeled "Low Profile M3*6 SS304 BLK" SKU: HW3947SC
I had issues with a single T-Nut binding on any screw I tried, but then remembered I had some roll-in T-Nuts and opted to use those instead.
Just in case you mixed them up and you're freaking out, the middle joiner plate is thinner than the joiner low and the holes are different.
I needed to install the heat inserts into 2 of the arms and only one had all already installed.
I had to "open up" the holes on one of the arms so I could actually fit the heat insert's flanged part to line it up with the hole so it would melt through the hole correctly, and I needed to take a diamond file to the square hole to allow the POM arm insert to be seated.
Also, just like the others, I really wish you guys would've kept the arms Punkfil Gooey Green, it feels more true to the RatRig aesthetic in my opinion.