Step Type:

Drag to rearrange

650mm 2GT 9mm Wide Timing Belt

Take one end of the belt and fold it back on itself so that the teeth lock together and form a loop

Insert the belt loop into the y_belt_mount as shown

y_belt_cover printed part

M3x16 Cap Head Screw

Place the y_belt_cover as shown and secure it in place with the two M3x16 screws

Take care not to over tighten the M3x16 screws as you can damage the printed parts

Set this assembly aside until Step 6

Your contributions are licensed under the open source Creative Commons license.