Take your time when performing this step as the heater pad cannot be removed or repositioned. Once any part of the heater pad is placed, do not try to move or remove it under any circumstances.

V-Minion Cast Bed Plate

180x180mm 24v Silicone Heater

Peel back roughly one inch of the protective sheet along a single side of the heater pad. Position the heater pad centrally on bottom of the aluminium bed and press down, adhering the edge of the heater to the bed.

Working gradually, peel the protective sheet, and adhere the rest of the heater to the aluminium bed.

Make sure no air bubbles are trapped under the silicone heater as this can lead to damage and failure of the heater