Step Type:

Drag to rearrange

bed_wire_guide_end printed part

M6x12 Cap Head Screw

3030 Drop-in T-Nut - M6

Insert the M6x12 screw into the bed_wire_guide_end printed part

Loosely thread the 3030 T-Nut onto the M6x12 screw. Do not tighten it at this point

Fit the wire guide assembly to the frame as shown

Fasten the M6x12 screw

Take care not to over tighten the M6x12 screw as you can damage the printed part

Your contributions are licensed under the open source Creative Commons license.