Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Ensure the right vc4_motor_spacer printed part is aligned with the plate

Insert the M5x45 Cap Head Screw all the way

Insert the M5x85 Cap Head Screw all the way

Once inserted, the printed part should be able to hold them in place

Install the timing pulley onto the NEMA17 shaft, oriented as shown

The timing pulley will be aligned and fully secured in a later step. Do not tighten the M3 grub screws

Your contributions are licensed under the open source Creative Commons license.