Editing Step 11 —
Y Linear rails - Part 2

Step Type:

Drag to rearrange

Place the second Y linear rail assembly on the T-slot but DO NOT tighten the screws.

Install the Y Joiner assembly on the linear rails.

Using the 16x M3x6 Cap Head screws, fasten the XY joiner plate assembly to the mgn15 carriages.

MGN15 Rails should be tightened to 98 N-cm of torque, overtightening the screws will result in rail binding.

Tip: Blue thread lock can be added to the thread of the M3x6 Cap Head screws.

Your contributions are licensed under the open source Creative Commons license.