Editing Step 18 —
Install the Jog wheel

Step Type:

Drag to rearrange

Install the Jog wheel on to the exposed end of the Lead Screw as shown

Ensure the lead screw surface is roughly1-2mm inside the jog wheel

After positioning the jog wheel, tighten the two set screws to secure it in place.

Pull the Y joiner plate away from the jog wheel, as to ensure the jog wheel and thrust bearing sit tight against the front Y plate.

Excessive force is unnecessary, as it may cause the lead screw to bind.

Push the lock collar against the Y front plate.

Tighten the set screw on the lock collar to secure it in place.

Your contributions are licensed under the open source Creative Commons license.