Editing Step 30 —
Assemble EVA Carriage

Step Type:

Drag to rearrange

Assemble your EVA carriage(s) on the X Axis Assembly.

The specific EVA carriage(s) you will be using depends on the Extruder/Hot-end combination you’ve chosen.

You can find instructions on how to assemble your specific EVA carriage(s) here.

The EVA carriage represented in the image may look different from yours, but the assembly steps remain the same.

When assembling, set your tension adjuster screw to the loosest possible position. After you finish assembly, tune the tension by tightening this screw.

Cap Head M3x12mm

EVA MGN15C Attachment

Tension adjuster screw

Your contributions are licensed under the open source Creative Commons license.