Step Type:

Drag to rearrange

Pulley GT2 for 9mm Belt

Mini Precision Shim 8x5x1

Cap Head Screw M5*25mm

Hex Locking Nut M5. CAUTION: do not over-tighten, leave loose enough for the pulley to spin freely.

Cap Head Screw M3*35mm. Do not tighten the top screw, this is your belt tensioner screw. Stop tightening as soon as it passes through the Hex nut.

Hex Nut M3

Your contributions are licensed under the open source Creative Commons license.