Editing Step 20 —
Assemble the VAOC - Part 5

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Insert the VAOC CAM onto the diffuser, using the white mark as an orientation reference.

5cm FPC

Foam Strip - 1mm x 8mm - Adhesive 3M - EVA material, make sure to cut the foam to the exact size of your connector.

Carefully examine the 5cm FPC. The side where the text '3DO FPC - 5cm' ends indicates the VAOC CAM side. Additionally, there are numbers that correspond with those on the CAM.

Use the white dot for alignment.

Connect the 5cm FPC to the VAOC CAM module, ensuring the correct connector orientation. Align the small white dot on the FPC cable with the white dot on the VAOC CAM.

Your contributions are licensed under the open source Creative Commons license.