Editing Step 21 —
Assemble the VAOC - Part 6

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Rat Rig VAOC LED module

Carefully feed the 5cm FPC cable through the LED module, ensuring it remains connected to the VAOC CAM module.

Gently press the LED module down to secure it in the designated slot.

The LED module is a generic PCB and may have imperfections along its edges that could cause interference when inserting it into the slot. If you encounter any issues, use sandpaper to smooth and round the edges of the PCB.

If sanding the PCB is necessary, do so in a well-ventilated area, as PCB dust is hazardous to your health. Avoid inhaling the dust.

Your contributions are licensed under the open source Creative Commons license.