Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

1x Extruded 90° Corner- 6030 Tall

2x M6x12 Cap Head Screw

2x 3030 Drop-in T-Nut - M6

Install the M6 cap head screws into the corner bracket as shown.

Loosely thread a 3030 T-Nut onto each of the M6x12 screws. Do not tighten it at this point.

Your contributions are licensed under the open source Creative Commons license.