Step Type:

Drag to rearrange

760mm 3030 Extrusion

Insert the 3030 extrusion into the bottom corner plate assemblies

You may need to rotate the 3030 t-nuts to insert the 3030 extrusion

Measure from the underside of the rear extrusion, to the top of the newly installed extrusion. It should measure either 230mm (for a V-Core 3 200) or 280mm (for a V-Core 300, 400 or 500)

Ensure the extrusion is fully inserted before continuting

Tighten the six marked M6x12 screws to secure the 3030 extrusion to the frame

Your contributions are licensed under the open source Creative Commons license.