Step Type:

Drag to rearrange

CoreXY idler assembly from Step 55

Position the CoreXY idler assembly onto the V-Core 3 frame as shown

Tighten the two M6x12 screws to secure the CoreXY idler assembly to the V-Core 3 frame

Make sure the assembly is seated against the front 3030 extrusion before tightening the M6x12 screws

M5x45 Cap Head Screw

Insert the M5x45 screw into the CoreXY idler plate as shown, in preparation for the next step

Your contributions are licensed under the open source Creative Commons license.