Step Type:

Drag to rearrange

760mm 3030 Extrusion

Insert the 3030 extrusions into the bottom corner plate assemblies

You may need to rotate the 3030 t-nuts to insert the 3030 extrusion

Measure from the underside of the side extrusions, to the top of the newly installed extrusion. It should measure either 230mm (for a V-Core 3 200) or 280mm (for a V-Core 300, 400 or 500)

Ensure the extrusions are fully inserted before continuting

Tighten the twelve marked M6x12 screws to secure the 3030 extrusions to the frame

Three screws on the left side are not visible

Your contributions are licensed under the open source Creative Commons license.