Editing Step 3 —
Quick Connectors - Part 3

Step Type:

Drag to rearrange

This step is intended to demonstrate how the quick connectors operate, the actual assembly process begins in Step 6

Before inserting the housing and set screw into the extrusions, make sure the housing hole is free from the set screw.

Insert the housing + set screw on the extrusion, with the set screw facing up.

The hole on the housing should be aligned with the hole in the extrusion so that the T-Nut pin can be inserted next.

Try both sides of the quick connector hole on the extrusion, one side is usually larger than the other.

Your contributions are licensed under the open source Creative Commons license.