V-Core 4 - Full machine build
View
Options
Preview new Authoring Experience
History
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Introduction
Details
Guide Steps
Review
Quiz
Insert the frame jig on the assembly, as shown.
Make sure the frame jig is inserted all the way and completely flush with the extrusion
Ensure the frame jig is inside the extrusion slot.
Push the frame jig to the right, eliminating any play between the frame jig and the extrusions
Tighten the quick connectors to secure the extrusions together.
Always verify the strength of the connection between the extrusions. If the connection is not strong, loosen the set screw, ensure that the T-nut pin groove is positioned below the set screw, and reconnect the extrusions.
Ensure the distance between the extrusion and the top of the assembly is 250mm
« Previous
Next »
Your contributions are licensed under the open source Creative Commons license.
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.