Step Type:

Drag to rearrange

Make sure the frame jig is inserted all the way and completely flush with the extrusion

Ensure the frame jig is inside the bottom extrusion slot.

Lay the assembly on a flat surface

Push the frame jig to the right, eliminating any play between the frame jig and the extrusions

Tighten the quick connector to secure the extrusions together.

Always verify the strength of the connection between the extrusions. If the connection is not strong, loosen the set screw, ensure that the T-nut pin groove is positioned below the set screw, and reconnect the extrusions.

Your contributions are licensed under the open source Creative Commons license.