Step Type:

Drag to rearrange

T-Slot 3030 Milled extrusion - 540mm

Insert the extrusion on the assembly, making sure the T-nut pins are aligned with the side extrusion slots.

Ensure the two extrusions are perfectly aligned

Refer to Step 10 on how to accurately align the extrusions.

Tighten the quick connectors to secure the extrusions together.

Always verify the strength of the connection between the extrusions. If the connection is not strong, loosen the set screw, ensure that the T-nut pin groove is positioned below the set screw, and reconnect the extrusions.

T-Slot 3030 Milled extrusion - 540mm

Insert the extrusion on the assembly, making sure the T-nut pins are aligned with the side extrusion slots.

Your contributions are licensed under the open source Creative Commons license.