V-Core 4 - Full machine build
View
Options
Preview new Authoring Experience
History
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Introduction
Details
Guide Steps
Review
Quiz
T-Slot 3030 Milled extrusion - 2xM8 - 475mm
Ensure the M8 holes are oriented in the correct direction
T-Slot 3030 Milled extrusion - 750mm
T-Slot 3030 Milled - 750mm with 3xM4 holes
Assemble this extrusion on the front of the frame, with the 3xM4 holes oriented as shown. Be aware of the extrusion orientation, the small spacing between the M4 holes must be upwards.
Align and insert the T-nut pin on the extrusion slot.
When sliding the extrusion to the right place, be careful, and take it slowly to not damage the extrusion coating.
Don't use ball-end hex-tools! Those can easily damage the quick connectors.
« Previous
Next »
Your contributions are licensed under the open source Creative Commons license.
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.