Editing Step 71 —
Connect the Beacon probe

Step Type:

Drag to rearrange

Ignore this Step if you are wiring the IDEX T1 toolhead

Beacon Z probe

USB Beacon cable

Connect the cable to the beacon and the Raspberry Pi

Use two zip ties to ensure the cable is secure to the toolhead body.

Route the cables back to the electronics enclosure and follow the piano wire previously installed.

Use some zip ties to clean the excess cable inside the electronics enclosure.

Have we mentioned how good the Beacon probe is? Just wait until you fire it up, you can find more info here.

Your contributions are licensed under the open source Creative Commons license.