Editing Step 73 —
Bed Thermistor

Step Type:

Drag to rearrange

Bed Heater with the incorporated Thermistor.

Do not mistake the bed heater wires for the bed thermistor wires. The thermistor wires are the ones with the JST 2 wire connector.

The thermistor is a resistor that strongly varies with temperature. When connecting a resistor you don't have to worry about cable order as resistors don't have polarity.

The magnetic sheet and heater pad will be installed later during the commissioning guide. Do not install them now.

Connect the Bed Thermistor to the first thermistor slot, counting from the bottom.

Place the heater pad next to the machine and connect only the thermistor

This is required to follow the guide and perform a sanity check

Your contributions are licensed under the open source Creative Commons license.