Editing Step 42 —
24 V Bed Power

Step Type:

Drag to rearrange

Red Wire with two Fork terminals (Length: 270 mm)

Insert one end on the seventh slot (numbered 7 on the board) and tighten the screw.

Insert the other end on the SSR Relay positive terminal (the supplied SSR Relay has the positive terminal next to the red indicator LED)

Black Wire with two Fork terminals (Length: 270 mm)

Insert one end on the last slot (numbered 8 on the board) and tighten the screw.

Insert the other end on the SSR Relay positive terminal.

It's crucial that the polarity is correct, incorrect wiring will result in severe damage. Double-check your connections using the images. If you have any doubts about your SSR Relay connections please check the supplier datasheet.

After tightening the screws, pull the wire to make sure it's firmly connected. If the wire releases/moves when pulling, reinsert it and tighten the screw.

Your contributions are licensed under the open source Creative Commons license.