Step Type:

Drag to rearrange

Use the full length of the RED and Black wires

2 Pin - JST XHP-2 - 2.54 Male

Crimp the GND (Black) wire to the left slot on the housing

Crimp the +12V (RED) wire to the left slot on the housing

Cut the white wire with 70mm, measuring from the Molex connector

2 Pin - JST XHP-2 - 2.54 Male

Crimp the PWM (White) wire to the left slot on the housing

Triple check all connections and crimps

Your contributions are licensed under the open source Creative Commons license.